§ 18.40.100. Walkways.  


Latest version.
  • Walkway development standards in the IP district are as follows:

    A.

    Applicability of Standards. The walkway standards contained in this section shall be applicable to all development within the IP zoning district unless a more restrictive requirement is imposed by an applicable specific plan.

    B.

    Location.

    1.

    Walkways consistent with the applicable specific plan and as approved by the director of public works shall be installed on both sides of all streets.

    2.

    Walkways shall be installed on at least one side of all minor streets.

    3.

    All walkways shall be constructed within the landscape setback along street frontages in compliance with any master landscape plans that may be established by an applicable specific plan or the director of planning and, whether or not a master plan exists, shall connect with those of neighboring lots to form a continuous pedestrian circulation system at buildout.

    4.

    The location of all walkways required shall be shown on the landscape plan submitted.

    C.

    Improvement Standards.

    1.

    All walkways shall be of concrete, or as specified by the applicable specific plan.

    2.

    The walkway along Airport Boulevard shall be at least five feet wide. The width of the remaining walkways shall comply with the provisions of the applicable specific plan.

    3.

    All walkways shall be installed by the project developer prior to of building occupancy.

(Ord. 1194 § 16, 2002: Ord. 1161 § 12, 1999: Ord. 845 § 1 (part), 1987: prior code § 12278.9)